The Hyperkin Duke is a loving recreation of a controller that small-minded and small-handed fools unjustly maligned. Unfortunately it also requires potentially a bit of love to get working. === {nav icon=linux, name=Linux} === On Linux, it tends to disconnect itself immediately, and isn't detected as an xinput controller. To resolve this, before plugging it in run: ``` sudo modprobe xpad echo "2e24 0652" | sudo tee --append /sys/bus/usb/drivers/xpad/new_id ``` === {nav icon=steam, name=Steam Link} === [[ https://www.youtube.com/watch?v=zYTMTaeB0P4&lc=UgyiLsSiSfdG0hrDp0B4AaABAg | Some rando commenting on YouTube ]] leads the way with: # Get SSH access to your Steam Link [[ https://github.com/ValveSoftware/steamlink-sdk#ssh-access | as per the official instructions ]] by creating the file `steamlink/config/system/enable_ssh.txt` (and **not empty!**) on a FAT32-formatted USB drive plugged into the Steam Link. # Turn off your Steam Link. And I mean truly turn it off; the {nav icon=power-off > Would you like to turn off your Steam Link > ◉ Turn Off, } option on the Steam Link home screen secretly just puts it to sleep, you need to probably do that and then yank out the power cable. # If it still doesn't work, make sure you indeed formatted the drive FAT32, it's using an MS-DOS partition table (unconfirmed if this is necessary), you don't have other drives plugged in (unconfirmed if this is necessary), and the text file isn't 0 bytes (unconfirmed if this is necessary), # If you're indeed now in via SSH, change the root password to something better with the `passwd` command. # Now run `echo "2e24 0652" >> /sys/bus/usb/drivers/xpad/new_id` See also https://www.reddit.com/r/Steam_Link/comments/i1dii2/semipermanately_enabled_ssh_on_the_steam_link/ which mentions > basically, `/dev/block/sda1` (if its fat32) is mounted as a overlay like so: {nav usb://steamlink/ > /mnt/config/}

The Hyperkin Duke is a loving recreation of a controller that small-minded and small-handed fools unjustly maligned. Unfortunately it also requires potentially a bit of love to get working. == Getting it working == === {nav icon=linux, name=Linux} === On Linux, it tends to disconnect itself immediately, and isn't detected as an xinput controller. To resolve this, simply run: ``` sudo modprobe xpad echo "2e24 0652" | sudo tee --append /sys/bus/usb/drivers/xpad/new_id ``` Even if already plugged in, this should instantly lead to it being properly detected and turning on; you'll see the smartwatch screen in the middle play the Xbox startup animation. === {nav icon=steam, name=Steam Link} === [[ https://www.youtube.com/watch?v=zYTMTaeB0P4&lc=UgyiLsSiSfdG0hrDp0B4AaABAg | Some rando commenting on YouTube ]] points in the right direction: # Get SSH access to your Steam Link [[ https://github.com/ValveSoftware/steamlink-sdk#ssh-access | as per the official instructions ]] by creating the file `steamlink/config/system/enable_ssh.txt` (and **not empty!**) on a FAT32-formatted USB drive plugged into the Steam Link. # Turn off your Steam Link. And I mean truly turn it off; the {nav icon=power-off > Would you like to turn off your Steam Link > ◉ Turn Off, } option on the Steam Link home screen secretly just puts it to sleep, you need to probably do that and then yank out the power cable. ** If it still doesn't work, make sure you *** indeed formatted the drive FAT32, *** it's using an MS-DOS partition table (unconfirmed if this is necessary), *** you don't have other drives plugged in (unconfirmed if this is necessary), *** and the text file isn't 0 bytes (unconfirmed if this is necessary), ** If you're indeed now in via SSH, you should change the root password to something better with the `passwd` command. # Now run `echo "2e24 0652" >> /sys/bus/usb/drivers/xpad/new_id` # Now you can plug in your Duke. See also https://www.reddit.com/r/Steam_Link/comments/i1dii2/semipermanately_enabled_ssh_on_the_steam_link/ which mentions > basically, `/dev/block/sda1` (if its fat32) is mounted as a overlay like so: {nav usb://steamlink/ > /mnt/config/} ---- {anchor #reviews} == Reviews == Not convinced? Read some reviews! * https://www.tomsguide.com/us/hyperkin-duke-xbox-controller,review-5374.html * http://gametyrant.com/news/hyperkin-duke-review-the-glorious-return-of-the-king * https://keithzg.ca/#Duke

The Hyperkin Duke is a loving recreation of a controller that small-minded and small-handed fools unjustly maligned. Unfortunately it also requires potentially a bit of love to get working. == Getting it working == === {nav icon=linux, name=Linux} === On Linux, it tends to disconnect itself immediately, and isn't detected as an xinput controller. To resolve this, before plugging it insimply run: ``` sudo modprobe xpad echo "2e24 0652" | sudo tee --append /sys/bus/usb/drivers/xpad/new_id ``` Even if already plugged in, this should instantly lead to it being properly detected and turning on; you'll see the smartwatch screen in the middle play the Xbox startup animation. === {nav icon=steam, name=Steam Link} === [[ https://www.youtube.com/watch?v=zYTMTaeB0P4&lc=UgyiLsSiSfdG0hrDp0B4AaABAg | Some rando commenting on YouTube ]] leadspoints in the way with:right direction: # Get SSH access to your Steam Link [[ https://github.com/ValveSoftware/steamlink-sdk#ssh-access | as per the official instructions ]] by creating the file `steamlink/config/system/enable_ssh.txt` (and **not empty!**) on a FAT32-formatted USB drive plugged into the Steam Link. # Turn off your Steam Link. And I mean truly turn it off; the {nav icon=power-off > Would you like to turn off your Steam Link > ◉ Turn Off, } option on the Steam Link home screen secretly just puts it to sleep, you need to probably do that and then yank out the power cable. #** If it still doesn't work, make sure you make sure you*** indeed formatted the drive FAT32, *** it's using an MS-DOS partition table (unconfirmed if this is necessary), *** you don't have other drives plugged in (unconfirmed if this is necessary), *** and the text file isn't 0 bytes (unconfirmed if this is necessary), #** If you're indeed now in via SSH, you should change the root password to something better with the `passwd` command. # Now run `echo "2e24 0652" >> /sys/bus/usb/drivers/xpad/new_id` # Now you can plug in your Duke. See also https://www.reddit.com/r/Steam_Link/comments/i1dii2/semipermanately_enabled_ssh_on_the_steam_link/ which mentions > basically, `/dev/block/sda1` (if its fat32) is mounted as a overlay like so: {nav usb://steamlink/ > /mnt/config/} ---- {anchor #reviews} == Reviews == Not convinced? Read some reviews! * https://www.tomsguide.com/us/hyperkin-duke-xbox-controller,review-5374.html * http://gametyrant.com/news/hyperkin-duke-review-the-glorious-return-of-the-king * https://keithzg.ca/#Duke